AVR® In-System Programmer mkII is used for field upgrades of AVR Flash microcontrollers. The AVRISP mkII combined with AVR Studio® can program tiny AVR and mega AVR devices using the ISP Interface, tiny AVR devices with TPI interface, and AVR XMEGA devices using the PDI Interface.
Key Features
AVR Studio compatible (AVR Studio 4.12 or later)
Supports all AVR devices with ISP or PDI interface
Programs both flash and EEPROM
Supports fuses and lock bit programming
Upgradeable to support future devices
Support target voltages from 1.8V to 5.5V
Adjustable ISP programming speed (50Hz to 8MHz SCK frequency)
USB 2.0 compliant (full speed, 12Mbps)
Powered from USB, does not require external power supply
Target interface protection
Short-circuit protection
Photos
AVRISP mkII Packaging
AVRISP mkII Packaging
AVRISP mkII programmer
AVRISP mkII programmer and accessories
Supported Devices
Refer to AVRStudio 4.18 sp3 version, the following devices are supported:
Supports the program files generated by IAR, ICCAVR, CVAVR
Connecting to target board
The AVRISP mkII connects to the target board through 3 optional cables. Depending on the existed connector on the target board, select the proper cable accordingly.
Standard 6-pin ISP Connector and/or PDI connector, using 6-pin ISP cable directly
Standard 10-pin ISP Connector, using 6-pin to 10-pin ISP cable
Custom ISP Connector, using 6-wire multicolour custom connector cable
Interfaces Header Pinouts
The figures below show the header pinouts for PDI, 6-pin ISP, and 10-pin ISP connectors: